Manual Bottle Capper Handheld Electric Bottle Capping Machine Cap Sealer Sealing Machine for Plastic Bottle Capp Diameter

Product Description:
Bittychoice hand-held electric Capping Machine is easy to carry and operate, can be easily used to tighten, loose, or spin a variety of screw caps. The adjustable clutch can effectively avoid the cap damage and reduce the wear and tear inside the plug. Once the cap is fully tightened, the machine automatically stops rotating head that you can cap the next operation.

Specification:
Power Input: AC220V
Power Consumption: 80w
Work Type: Electric Capping
Operation forms: handheld
Capping diameter : 10-50m
Production capacity: 15-30 bottles / minute (depending on proficiency)
Bottle Height: not limited
Torque :3-30kgf. cm
Fitment: For screwing and unscrewing of the screw cap
Rubber insert: 10 - 20 mm; 20 - 30 mm; 30 - 40 mm; 40 - 50 mm
No-load speed: 1000 r/min
Connector 14 inch
Clutch 5-25kg 5-35kg adjustable

How to use
Put chuck onto the cap to be tightened.
Push down switch to active the capper.
The capper starts and tightens the cap.
The capper automatically shuts off while reaching the pre set torque.

Package Content:
1 x Electric Capping Machine
1 x Spring Balancer
4 x Rubber Insert
2 x Chuck
1 x Plug Adapter
1 x M5 Allen Key
1 set x Auxiliary tools

Attention:
1.As the above picture shows, if your cap size are different within the range, then you can use the machine directly. If the differences of your cap size are too big, then you will need to change the accessories according to your requirement.
For example, one cap is 15mm, another one is 25mm, then you will need to change the Silicone pad (four white pads showed in the pic). If one cap is 15mm, another one is 35mm, then you will need to change the aluminum head(two silver heads showed in the pic) and the silicone pad as well.
2.This machine is only for 220 V, if you need 110 V, you need to buy a voltage transformer in addition.This tool is mainly used for the unscrewing and tightening of kinds of screw cap.