Jump-N-Carry JX27 3000 Peak Amp 12V Jump Starter: Model: JX27 Color: yellow, red Product specifications: US regulations Applicable models: gasoline car 6.0L / diesel car 5.0L Charging time: about 2-3 hours USB interface: 4 interfaces Suitable temperature: -40-+ 80 ° C LED display: power / voltage / input / output Battery capacity: 20000mah Peak current: 600A Auto start voltage: 12V Charging input voltage: 5V / 1A USB output voltage: 5V / 1A / 2A Cycle bad service life: about 3000 times
Smart battery clip: 1. Short circuit prevention: the positive and negative poles of the starting power supply will be automatically cut off when clamped together 2. Anti-reverse charge: the positive and negative poles of the power supply will be automatically powered off when clamped together 3. Anti-reverse connection: when the positive and negative poles of the battery clip are reversed, it will automatically power off and alarm 4. Anti-over discharge: when the power supply is too low, the smart clip will remind to prohibit the operation 5. Anti-overcurrent: If the starting current is too large, the operation will be terminated to protect the power supply and the car
Power Supply: 1. Anti-reverse protection: anti-reverse interface design, to ensure that users will not reverse the power supply +-pole when using, more safe to use 2. Short circuit protection: add insurance device, automatic protection in case of abnormal short circuit, to prevent motherboard battery damage 3. Overcharge protection: supply power to the intelligent terminal for a long time or use the startup power supply, when the saturation is reached, the system will automatically shut down 4. Constant current protection: intelligent real-time monitoring of output current, when the output current reaches a critical point, the output is actively turned off 5. Voltage stabilization protection: when the smart cell detects fluctuations in the input or output voltage, it will regulate and regulate the voltage to ensure a constant voltage output. 6. Over-discharge protection: When the smart battery detects over-discharge of the power supply, it will actively turn off the output to ensure the safety of the power supply 7. Temperature protection: When the intelligent cell detects fluctuations in the input or output temperature, it will automatically protect the temperature. 8. Magnetic field protection: adding magnetic field interference originals can also be used normally in scenes with large magnetic fields 9. Polymer lithium battery: high safety
Advantage: 1. Automobile double start, DO anti-reverse connection, USB fast charge, low temperature start, emergency lighting, large capacity, intelligent protection, safety hammer 2. Applicable models: cars, off-road, business, electric cars, motorcycles, vans, pickups, 12V trucks 3. Simple operation 4. Three kinds of lights: lighting, flash, SOS rescue
Tips: 1: It takes about 3 hours to fully charge the product. Please turn it on first and then charge the product. 2: When starting the car, you need to turn the switch to OFF and then start the car. 3: The peak discharge of the peak 600A is 60C. It can start gasoline vehicles with a displacement of less than 6.0 and diesel vehicles with a displacement of less than 2.0. (Except for cars with aging engines.) 5: The product is not used for a long time, it is recommended to charge it once every 3 months. 6: The product needs to be placed at room temperature, which is beneficial to the service life of the product.
Special considerations for the use of mobile power: 1. When starting the car, plug the blue plug tightly into place, otherwise it will affect the effect. 2. When starting the car, the blue power indicator is best to be more than 60%, so as to extend the service life of the product. 3. If the car can't start, don't force it to continue to start, check whether the battery clip is clamped, and check whether the battery head of the original car is rusted or dirty. Continue to start after cleaning. 4. During the start-up process, if the vehicle can not start (1-2 times), do not continue to start it forcibly, you should further check whether there are other faults, otherwise it will burn the fuse and damage the starting power. Source phenomenon. 5: When starting the car, use the clip port to use the air pump and other car electrical appliances, you need to turn the switch to OFF. 6: If your car exceeds the A number of the product, the power supply will play an automatic power-off protection function during the startup of the car. Plug in the charger and reactivate it to normal use. 7: When the car is fed and there is no electricity at all, clamp the car power clip directly on the positive and negative poles of the car to start. If the car is powered, remove the positive pole and put the clip Clamp on the ground, and the negative pole on the negative pole. You can start. 8: The first time you start the car, you need to discharge the electricity in the product, plug in the charger to charge, and then start the car again.