HD 1080P Digital Wireless Backup Camera System Kit with Super Night Vision for Trucks Campers Vans Cars
Free Shipping to USA and Worldwide
1. Reversing visual function: Through the camera's WIFI link to smart devices, high-definition rear view can be achieved.
2. Reversing triggering video: every time you turn on the mobile phone to reverse, the reversing video is saved on the smartphone side, and it is overwritten five times to record your driving trajectory for each reversing and protect your safety responsibility.
3. Intelligent electronic rearview mirror function: Real-time viewing through the device side, after entering the rearview video, you can watch the real-time situation behind the vehicle, full-view viewing, beyond the traditional rearview mirror, the viewing angle is small, the vision is blurred, and driving safety is improved.
4. Intelligent background start, voice call start: the back-end trigger signal is detected in the background of the Android system, and it starts automatically, without manual entry. The voice call of the Apple system is activated, and the static IP link realizes the simultaneous access to the Internet and reversing.
5. Software download/QR code scan download/website download: open the scan window, scan the product packaging QR code, Apple devices enter APP Srore interface search; W-Car download Android devices enter Tencent app treasure interface search; WCar download
1/4 CMOS total pixels: 720*504 pixels
Lens angle: 170 degrees
I R night vision lights: 8 IR infrared night vision lights
Minimum illumination: 0 Lux
Waterproof rating: IP67
Suitable system: Android, IOS
Size: 340*172*60 mm
1. Interface icon; reverse video view WIFI link setting Rearview mirror function
2. Use on Android devices; click (Background Run + Startup) when installing the software. The background of the software will not consume power. The software runs in the background, and the reversing video will automatically pop up in any interface. Please turn off WIFI when you need Internet access In the car .
3. Apple device use; after software installation, set static IP 1; connect W-Car name WIFI, 2 to enter the WIFI setting interface, remember the two lines under "DHCP" (IP address. Subnet mask) Word, click "Static" here, fill in the two lines of numbers below the static button (IP address. Subnet mask).
3 Click back to set up successfully. Set static IP, can realize WIFI and
3G, 4G communication at the same time, does not affect the Internet access channel of mobile phones.
4. The voice call device starts; Apple uses Siri to call: "W-Car" to start the APP.
How to install correctly?
1. Remove the plastic shell of the back box and find the wiring position of the three power cords to install. The positive pole of the reversing lamp (yellow power cord), please connect the positive pole of the reversing lamp power cord. ACC power supply positive pole (red power cord), please connect the ACC wiring position on the car. The negative pole is grounded (black power cord), please connect the negative harness on the car.
2. Install the camera, remove the license plate light, and connect the camera to the host through the slit of the license plate light. Connect the accurate position of the three power cords, start the vehicle, adjust the reverse angle of view, use the screw to fix the camera with wire, and finally fix it with cable ties.
1. First turn off the power supply of the car, and it is strictly forbidden to power on when the camera power cord is not connected.
2. Determine the installation location of the car camera.