EBD-A20H is a variety of discharge mode of electronic load, suitable for all types of battery capacity testing, power supply testing, support connect to the computer, through online software with more extensions
Main Features:
Connection:
four-wire detection, voltage and current channel separate wiring, to ensure measurement accuracy
LCD display:
voltage, current, capacity, time and so on test data
Voltage test:
0.000-4.500V (low pressure) accuracy to 0.003V, error ±0.5%; 4.50V-30.00V(high presure) accuracy to 0.01V, error ± 0.5%
Current test:
0.10-20.00A, accuracy to 0.01A, error ± 0.5%
Capacity test:
10Ah, the resolution of 0.001Ah; 10Ah-100Ah, the resolution of 0.01Ah; above 100Ah, the resolution of 0.1Ah
Specifications:
*Power supply: DC12V 1A
*Voltage setting: 0.00-30.00V, the minimum step 0.01V
*Current setting: 0.1-20.00A minimum step 0.01A (Automatic limit current when power is overrun)
*Test mode A: DSC-CC: discharge current is constant, used to test battery capacity or supply current;
*Test mode B: DSC-CP: Discharge power is constant, used to simulate constant power equipment or test power
*Voltage test: 0.000-4.500V (low pressure) accuracy to 0.003V, error ±0.5%; 4.50V-30.00V(high pressure) accuracy to 0.01V, error ± 0.5%
*Current test: 0.10-20.00A, accuracy to 0.01A, error ± 0.5%
*Capacity test: 10Ah, the resolution of 0.001Ah; 10Ah-100Ah, the resolution of 0.01Ah; above 100Ah, the resolution of 0.1Ah
*Discharge power: max 200W, it should be controlled within 90% for a long time working
*Connection: four-wire detection, voltage and current channel separate wiring, to ensure measurement accuracy
*LCD display: voltage, current, capacity, time and so on test data
*Computer online: dedicated USB to TTL serial port (Mini USB port, not an ordinary USB cable), curve plotting, automatic current test, calibration reference, upgrade equipment
Note:
The discharge current is limited by the maximum power, above 10V is less than 20A, and above 20V is lower than 10A